Curriculum
- 2 Sections
- 42 Lessons
- 210 Hours
Expand all sectionsCollapse all sections
- Level 121
- 1.1The Role of the Process Engineer
- 1.2Introduction to Process Chemical Engineering
- 1.3Advanced Mass and Energy Balance
- 1.4Advanced Thermodynamics
- 1.5Advanced Fluid Mechanics
- 1.6Advanced Heat Exchanger
- 1.7Piping & Valves
- 1.8High Pressure Vessel
- 1.9Tanks (Case Study: Ammonia tank)
- 1.10Machinery
- 1.11Pumping System
- 1.12Compressors
- 1.13Turbine
- 1.14Advanced Process control & Instrumentation
- 1.15Plant Design
- 1.16Advanced Simulation Program
- 1.17Environment, Health and Safety EHS
- 1.18Plant Model (Nitric Acid Plant)
- 1.19Cases Studies
- 1.20Introduction to Process Engineering Advanced level
- 1.21Teamwork & Time Management
- Level 221
- 2.1Reactor
- 2.2Catalysts
- 2.3Waste and Hazardous Waste Management
- 2.4Process Hazard Analysis, PHA
- 2.5Hazop study, real Cases Studies
- 2.6Manual and Stander Operating Procedures “SOP”
- 2.7Plant Follow-up
- 2.8Troubleshooting analysis
- 2.9Comply with the Standards
- 2.10Near Miss/ Incident
- 2.11Management of Change MOC
- 2.12Work Permits
- 2.13Introduction to Integrated Management System IMS
- 2.14Introduction to Process system Management PSM
- 2.15Introduction to renewable Energy
- 2.16Introduction to Green H2 and Green Ammonia
- 2.17Real plant Model
- 2.18Introduction to Data Analysis
- 2.19Fourth Industrial Revolution 4.0
- 2.20leadership & Strategic Management
- 2.21Project
Introduction to Process Chemical Engineering
Next